Product Overview
Designed with advanced users in mind, the Eden Mini caters to flexibility, affordability, and a compact form factor. It prioritizes essential components, foregoing on-board USB and pin headers to ensure a cost-effective approach, making it an ideal choice for those looking to seamlessly integrate a board into their projects.
The 7Semi Eden Mini ATmega328P Board - 5V is a microcontroller board that boasts the ATmega328P chip within its compact frame. Equipped with 14 digital input/output pins (including 6 PWM outputs), 6 analog inputs, an onboard resonator, and a reset button, this board is tailored for semi-permanent installations in diverse objects or exhibitions. With headers not pre-mounted, it offers flexibility for connector options or direct wire soldering. Featuring compatibility with the Eden Mini pin layout, programming this board using the Arduino IDE software is a breeze. Additionally, it comes preburned with a bootloader for effortless code uploading, leveraging the original STK500 protocol and eliminating the need for external hardware programmers.
Directly connecting to the FTDI Basic Breakout board and supporting auto-reset, the 7Semi Eden Mini also functions with the FTDI cable. However, it's important to note that the FTDI cable lacks the DTR pin, rendering the auto-reset feature inactive in this configuration.
VCC The regulated 5 volt supply.
GND Ground pins.
External Interrupts: 2 and 3. These pins can be configured to trigger an interrupt on a low value, a rising or falling edge, or a change in value. See the attachInterrupt function for details.
PWM: 3, 5, 6, 9, 10, and 11. Provide 8-bit PWM output with the analogWrite function.
SPI: 10 (SS), 11 (MOSI), 12 (MISO), 13 (SCK). These pins support SPI communication, which, although provided by the underlying hardware, is not currently included in the Arduino language.
LED: 13. There is a built-in LED connected to digital pin 13. When the pin is HIGH value, the LED is on, when the pin is LOW, it's off.
Warranty Information
Reviews
