The 7Semi STM32L011D4P6 Dev Board is a compact and energy-efficient embedded development platform based on the STM32L0 series microcontroller by STMicroelectronics. Featuring the STM32L011D4P6 ARM Cortex-M0+ MCU with 16KB Flash and 2KB SRAM, this board offers exceptional low-power performance for IoT, wearables, remote sensing, and battery-powered applications.
With native USB Type-C power, breadboard-friendly pinout, and an onboard reset button, this board is ideal for rapid prototyping and educational use. It provides access to all key peripherals including GPIO, I2C, SPI, USART, and ADC with ultra-low power consumption modes.
Features
-
STM32L011D4P6 ARM Cortex-M0+ MCU
-
USB Type-C power input
-
Breadboard-friendly 2.54mm pitch
-
32-bit ultra-low power architecture
-
16KB Flash, 2KB SRAM, 512B EEPROM
-
Interfaces: I2C, SPI, USART, ADC, DAC, GPIO
-
Low-power RTC with calibration and wake-up timer
-
Onboard RESET button and power LED
Applications
-
Battery-operated devices
-
Wireless sensor nodes and IoT edge nodes
-
Environmental sensing and remote monitoring
-
Wearables and health trackers
-
Secure authentication systems
-
Embedded system education and R&D
What is Included?
-
1 × 7Semi STM32L011D4P6 Development Board
Frequently Asked Questions (FAQ)
Q1: What development environments support this board?
A: It works with STM32CubeIDE, Keil MDK, IAR Embedded Workbench, and PlatformIO.
Q2: Can I program it using a USB cable directly?
A: No, the board needs an external ST-Link V2 or compatible programmer for flashing via SWD.
Q3: Is this board compatible with Arduino?
A: Not natively. You can try STM32duino with some effort, but STM32CubeIDE is recommended.
Q4: Does it support ultra-low power operation?
A: Yes, the STM32L011 features Stop and Standby modes with current consumption as low as 350nA.
Q5: What is the default operating voltage?
A: The board runs at 3.3V by default. Ensure your peripherals are compatible.
Resources
- MCU:
- STM32L011D4P6 (ARM Cortex-M0+)
- Clock Speed:
- Up to 32 MHz internal oscillator (MSI)
- Flash Memory:
- 16 KB
- SRAM:
- 2 KB
- EEPROM:
- 512 Bytes
- Interface Support:
- USART, SPI, I2C, ADC, DAC, GPIO
- USB Support:
- Power via USB Type-C
- Voltage Range:
- 3.3V -5V
- Board Dimensions:
- Approx. 48mm x 19mm
- Board Weight:
- 3g
