7Semi 24V Step-Up Boost Converter Module 2.5V-5.5V Input 100mA
- SKU
- BO-10236
Select a photo to enlarge it.
10 x 9 x 2.84mm
About this product
The 7Semi 24V Step-Up Boost Converter Module is a compact DC-DC power conversion board designed to increase a low DC input voltage to a fixed 24V output. With an input voltage range of 2.5V to 5.5V, the module provides a convenient solution for powering low-power 24V circuits from compact DC power sources.
Based on the MT3540 boost converter IC, the module operates at a 1.2MHz switching frequency and delivers up to 100mA output current at 24V when supplied with a 5V input. The high switching frequency enables a compact design suitable for space-constrained electronic applications.
The converter features a typical quiescent current of 40uA and integrated protection functions, including undervoltage lockout, internal switch current limiting, and thermal shutdown. These features support efficient and reliable operation under appropriate electrical and thermal conditions.
The board provides clearly labeled VIN, OUT, and GND connection pads for straightforward integration. With compact dimensions of just 10 x 9 x 2.84mm, it is suitable for embedded electronics, portable devices, display circuits, sensor systems, and other low-power applications requiring a fixed 24V DC supply.
Note: The maximum 100mA output current is specified at 5V input only. Available output current depends on the input voltage, operating temperature, and load conditions.
Key Features
-
Fixed 24V Output: Converts low-voltage DC input into a regulated 24V output.
-
Wide Input Voltage Range: Supports 2.5V to 5.5V DC input.
-
100mA Output Capability: Delivers up to 100mA at 24V with a 5V input supply.
-
High Switching Frequency: Operates at 1.2MHz for compact power conversion.
-
Low Quiescent Current: Features 40uA typical quiescent current.
-
Efficient Boost Conversion: Provides approximately 80% efficiency under the specified operating conditions.
-
Undervoltage Lockout: Helps prevent improper operation when the input supply voltage is insufficient.
- Integrated Protection: Includes undervoltage lockout (2.2V typical), switch current limiting, and thermal shutdown at 155 deg C.
-
Compact PCB Design: Measures just 10 x 9 x 2.84mm for space-constrained applications.
-
Simple Connections: Provides VIN, OUT, and GND connection pads for easy integration.
Products includes
1x 7Semi 24V Step-Up Boost Converter Module 2.5V-5.5V Input 100mA
Resources