7Semi 12V Step-Up Boost Converter Module 2.5V-5.5V Input 200mA
- SKU
- BO-10235
Select a photo to enlarge it.
10 x 9 x 2.84mm
About this product
The 7Semi 12V Step-Up Boost Converter Module is a compact DC-DC power conversion board designed to increase a low DC input voltage to a fixed 12V output. Based on the MT3540 step-up converter, the module operates from a 2.5V to 5.5V DC input and features a 1.2MHz switching frequency for efficient power conversion in space-constrained electronic applications.
The module is designed to deliver up to 200mA at 12V when powered from a suitable 5V input source, subject to load and thermal conditions. The controller includes undervoltage lockout, switch current limiting, and thermal shutdown protection.
Its compact design makes it suitable for portable electronics, embedded systems, sensor modules, low-power 12V circuits, and prototype development.
Note: The 200mA output rating applies at a 5V input only and should not be assumed across the entire input voltage range.
Key Features
-
Fixed 12V Output: Steps up a low-voltage DC input to a regulated 12V output.
-
Wide Input Range: Supports 2.5V to 5.5V DC input.
-
Output Current: Supports up to 200mA at 12V with a suitable 5V input supply, subject to operating conditions.
-
High Switching Frequency: Uses a 1.2MHz switching frequency for compact power conversion.
-
Compact PCB Design: Measures approximately 10 x 9 x 2.84 mm.
-
Simple Connections: Provides labeled VIN, OUT, and GND terminals for easy connections.
- Integrated Protection: Includes undervoltage lockout (2.2V typical), switch current limiting, and thermal shutdown at 155 deg C.
- Low-Power Applications: Suitable for embedded electronics, sensor circuits, and compact 12V power supplies.
Products Includes
1 x 7Semi 12V Step-Up Boost Converter Module 2.5V-5.5V Input 200mA