7Semi INA237 85V 16-Bit Current Voltage Power Monitor Qwiic I2C
- SKU
- BO-10241
Select a photo to enlarge it.
24 x 21 x 12.75 mm
About this product
The 7Semi INA237 Current, Voltage and Power Monitoring Breakout Board is a high-precision digital power monitoring module designed to measure DC current, bus voltage, power consumption, and internal sensor temperature. Built around the Texas Instruments INA237, the module integrates a 16-bit ADC, programmable measurement settings, and an I2C interface for reliable power monitoring in embedded and industrial applications.
The module supports bus voltage measurements from 0V to 85V and features an onboard 10mOhm (0.010 Ohm) current-sensing resistor. The INA237 provides selectable shunt voltage measurement ranges of +/-40.96mV and +/-163.84mV, with +/-50uV maximum input offset voltage and +/-0.3% maximum gain error.
For flexible measurement control, the sensor supports programmable ADC conversion times, sample averaging, and configurable alert functions. It also includes an internal temperature sensor for monitoring IC die temperature.
The breakout features two 4-pin Qwiic connectors, a 3-pin screw terminal for IN+, VBUS, and IN- connections, and additional breakout pads for power, I2C, and alert signals. Four selectable I2C addresses allow multiple compatible devices to operate on the same bus.
With its compact 24 x 21 mm PCB design, the module is suitable for battery monitoring, DC power supplies, robotics, industrial automation, embedded power management, and energy measurement applications.
Key Features
-
High-Precision Power Monitoring: Measures DC current, bus voltage, calculated power, and internal sensor die temperature.
-
16-Bit Delta-Sigma ADC: Provides high-resolution digital measurements for accurate power monitoring.
-
Current Measurement Accuracy: Features +/-50uV maximum input offset voltage and +/-0.3% maximum shunt gain error.
-
Low Temperature Drift: Supports +/-0.02uV/deg C maximum offset drift and +/-50ppm/deg C maximum gain error drift.
-
High Common-Mode Rejection: Provides 120dB minimum CMRR for reliable current measurements.
-
Power Monitoring Accuracy: Supports +/-1.6% maximum full-scale power measurement error from -40 to +100 deg C..
-
Wide Bus Voltage Range: Measures bus voltages from 0V to 85V, with a common-mode input range of -0.3V to +85V.
-
10mOhm Shunt Resistor: Features an onboard 0.010 Ohm current-sensing resistor for differential current measurement.
-
Selectable Shunt Voltage Range: Supports +/-40.96mV and +/-163.84mV full-scale measurement ranges.
-
Fast Alert Response: Supports alert response times as low as 75us under specified measurement conditions.
-
Integrated Temperature Monitoring: Includes an internal temperature sensor with +/-1 deg C maximum accuracy at 25 deg C.
-
Programmable Measurement Settings: Supports ADC conversion times from 50us to 4.12ms and averaging from 1 to 1024 samples.
-
High-Speed I2C Interface: Supports I2C communication speeds up to 2.94MHz.
-
Four Configurable I2C Addresses: Supports 0x45 (default), 0x40, 0x41, and 0x44 through onboard address-selection jumpers.
-
Dual Qwiic Connectors: Features two 4-pin Qwiic connectors for convenient I2C integration.
-
3-Pin Screw Terminal: Provides IN+, VBUS, and IN- connections for current and bus voltage sensing.
-
Programmable Alert Output: Supports configurable voltage, current-related shunt, power, temperature, and conversion-ready alerts.
-
Compact Board Design: Features a 24 x 21 mm PCB with four mounting holes for easy installation.
Items Included:
-
1 x 7Semi INA237 Current and Voltage Sensor Breakout Board
-
1 x Pin Header Strip
Note: Qwiic cable is not included.