7Semi BME690 I2C Air Quality Temperature Humidity Pressure Gas Sensor Probe - Plastic
- SKU
- ES-12296
7Semi BME690 4-in-1 Environmental Sensor Probe with Plastic Housing, 1m Cable, I2C Interface, Temperature, Humidity, Barometric Pressure, Gas Resistance, and Software-Based Air Quality Monitoring.
Select a photo to enlarge it.
Out of stock
Shipped in 24 Hours from Mumbai Warehouse
About this product
The 7Semi BME690 Environmental Sensor I2C Probe - Plastic is a compact, 4-in-1 environmental sensing solution designed to measure temperature, relative humidity, barometric pressure, and gas resistance. Built around the Bosch Sensortec BME690 sensor, the probe is suitable for indoor air quality monitoring, HVAC systems, smart buildings, IoT applications, and environmental data logging.
The BME690 integrates high-accuracy environmental sensing with a metal-oxide gas sensor capable of responding to volatile organic compounds (VOCs), volatile sulfur compounds (VSCs), and other reducing gases. When used with compatible Bosch BSEC software, the sensor data can be processed to calculate Indoor Air Quality (IAQ) index, breath-VOC equivalent, and CO2-equivalent values. These software-derived estimates are not direct measurements of individual gas concentrations.
The probe communicates through an I2C interface with a fixed address of 0x76, allowing integration with compatible microcontrollers and embedded systems. Its configurable measurement modes provide flexibility for balancing power consumption, measurement frequency, and environmental monitoring requirements.
A ventilated plastic sensing cap helps protect the internal sensing element from accidental contact while allowing ambient air to reach the sensor. The integrated 1m, 4-wire PVC cable enables remote sensor placement away from heat-generating electronics, making the probe suitable for environmental monitoring installations and compact sensing systems.
Combining temperature, humidity, pressure, and gas sensing in a single remote probe, the 7Semi BME690 offers a practical solution for indoor environmental monitoring, smart ventilation, air-quality research, and connected sensor applications.
Key Features
-
4-in-1 Environmental Sensing: Measures temperature, relative humidity, barometric pressure, and gas resistance using a single BME690 sensor.
-
Advanced Gas Sensing: Detects gas-resistance changes associated with VOCs, VSCs, and other reducing gases.
-
Software-Based Air Quality Monitoring: Supports IAQ index, bVOC-equivalent, and CO2-equivalent estimates through compatible Bosch BSEC software.
-
Accurate Temperature Measurement: Provides +/-0.5 deg C accuracy from 0 to +65 deg C under specified conditions.
-
Humidity Measurement: Supports 0 to 100% RH measurement with +/-3% RH accuracy under specified conditions.
-
Precision Barometric Pressure Sensing: Measures 300 to 1100 hPa with +/-0.5 hPa absolute accuracy under specified conditions.
-
Fixed I2C Address: Communicates through I2C at address 0x76 for straightforward microcontroller integration.
-
Low-Power Measurement Modes: Supports configurable measurement and gas-sensing modes to balance power consumption and update rate.
-
Programmable Gas Heater: Uses an integrated heater for controlled gas-resistance measurements and configurable gas-scanning profiles.
-
Ventilated Plastic Housing: Helps protect the sensing element from mechanical contact while allowing ambient airflow.
-
Remote Sensor Placement: Features a 1m, 4-wire PVC cable for convenient positioning away from the main controller.
-
Embedded System Compatibility: Suitable for Arduino, ESP32, STM32, Raspberry Pi, and other controllers with compatible I2C voltage levels.
Resources