7Semi EG800AK-CN 4G LTE Cat 1 + GNSS Pico Module

SKU
CM-10153

Provides cellular LTE connectivity with GNSS Support for IoT, telemetry and remote monitoring applications.

7Semi EG800AK-CN 4G LTE Cat 1 + GNSS Pico Module

Select a photo to enlarge it.

26 × 23 × 5.98 mm

Write a Review
₹1,248.00
56 in stock
Adding to cart… The item has been added

About this product

The 7Semi EG800AK-CN 4G LTE Cat 1 bis + GNSS Pico Module is a compact cellular communication board designed for IoT, telemetry, smart metering, industrial automation, and remote monitoring applications. Built around the EG800AK-CN module, it supports LTE download speeds up to 10 Mbps and upload speeds up to 5 Mbps.

The board features a Nano SIM card holder, UART communication interface, dedicated cellular and GNSS antenna connections, and a compact 26 × 23 mm footprint. Its GNSS functionality supports satellite-based positioning applications using GPS, BeiDou, GLONASS, and Galileo.

Designed for integration with compatible microcontrollers and embedded systems, the module supports AT command-based communication and cellular data connectivity for remote monitoring and connected-device applications.

Features

  • 4G LTE Cat 1 bis Connectivity: Supports cellular data communication with download speeds up to 10 Mbps and upload speeds up to 5 Mbps.

  • Regional LTE Band Support: Supports LTE-FDD B1/B3/B5/B8 and LTE-TDD B34/B38/B39/B40/B41 for compatible cellular networks.

  • Integrated GNSS Positioning: Supports GPS, BeiDou, GLONASS, and Galileo for location tracking and positioning applications.

  • UART Communication Interface: Enables AT command communication and data exchange with compatible microcontrollers.

  • Nano SIM Card Slot: Features an onboard Nano SIM holder for cellular network connectivity.

  • Dedicated Antenna Connections: Provides separate connections for cellular and GNSS antennas.

  • Low-Voltage Operation: Designed for a nominal 3.8V DC supply.

  • Compact Pico Form Factor: Features a 26 × 23 mm board footprint for space-constrained embedded designs.

  • IoT Application Support: Suitable for telemetry, remote monitoring, smart metering, asset tracking, and industrial automation.

Regional Compatibility: CN variant suitable for 4G LTE networks in India and China.

Note: The GNSS interface supports passive antennas only. Active GNSS antennas are not supported.

Items Included:

  • 1 × 7Semi EG800AK-CN 4G LTE Cat 1 bis + GNSS Pico Module

  • 1 × 4G LTE FPC Antenna with U.FL Connector

Resources

Datasheet

DXF File

Driver installation guide

AT Commands manual

EG800 Driver

 

Related Products