7Semi LSM303AGR 6DoF Accelerometer and Magnetometer Module (I2C)
- SKU
- ES-12301
Select a photo to enlarge it.
15 × 8 × 4.7 mm
About this product
The 7Semi LSM303AGR 6DOF Motion & Compass Sensor Module is a compact, low-power sensing board integrating a 3-axis accelerometer and a 3-axis magnetometer for motion detection, tilt measurement, and electronic compass applications. It provides six independent measurement axes, enabling acceleration and magnetic field measurements along the X, Y, and Z directions.
The module supports selectable acceleration ranges of +/-2g, +/-4g, +/-8g, and +/-16g, along with a magnetic field measurement range of +/-50 gauss. Its digital I2C interface allows easy integration with microcontrollers and embedded systems for developing tilt-compensated compasses, orientation estimation, and motion-monitoring applications.
Designed for 3.3V operation, the board features a compact 15 × 8mm footprint and a JST-style connector for convenient integration into space-constrained designs. It is suitable for robotics, navigation systems, wearable electronics, portable devices, and industrial motion-sensing applications.
Features:
-
6DOF Motion & Magnetic Sensing: Combines a 3-axis accelerometer and 3-axis magnetometer for acceleration, tilt, and magnetic field measurements.
-
Selectable Acceleration Range: Supports programmable full-scale ranges of +/-2g, +/-4g, +/-8g, and +/-16g for different motion-sensing requirements.
-
Wide Magnetic Measurement Range: Measures magnetic fields up to +/-50 gauss for electronic compass and magnetic sensing applications.
-
Digital I2C Communication: Supports I2C communication with microcontrollers and embedded systems, featuring a default accelerometer address of 0x19 and magnetometer address of 0x1E.
-
16-Bit Digital Output: Provides digital acceleration and magnetic field measurement data for further processing.
-
Low-Power Operation: Supports selectable power modes and measurement resolutions for energy-efficient applications.
-
Electronic Compass Applications: Enables magnetic heading and tilt-compensated compass calculations using host-side processing and calibration.
-
3.3V Operation: Designed for integration with 3.3V embedded systems.
-
Compact Module Design: Features a 15 × 8mm PCB footprint suitable for compact and space-constrained electronics.
-
Qwiic Connector: Features a 4-pin Qwiic connector for convenient, plug-and-play I2C connectivity with compatible microcontrollers and development boards.
Products Includes
-
1 x 7Semi LSM303AGR 6DoF Accelerometer and Magnetometer Module
-
1 x Qwiic Connector Cable
Resources